Taking A Test; Rolling Re-Tests - Smart Start Alcohol Interlock User Manual

3.2 Taking a Test

When the analysing is complete, the test results will show on
the screen.
See test results on page 11

3.3 Rolling Re-tests

You will be requested to perform rolling re-tests while the
vehicle is running. The interlock will ask for a rolling re-test
by indicating BLOW in the display and a 5-minute countdown
timer. It'll also beep every 15 seconds until the test is taken.
You have 5 minutes to perform the rolling
re-test. We recommend you pull over to do this,
however if this is not possible, you can complete
the test while driving. If you fail to take the re-
test, the interlock will show MISSED TEST. This
will put interlock into a VIOLCK countdown.
An unscheduled service is required for failure to perform
a rolling re-test. You must go to service within 6 days.
Failure to take a rolling re-test is a violation.
DO NOT turn off your vehicle without taking the rolling
re-test. Take every test that the interlock asks for.
Missed re-tests are logged on the interlock record and an
extra service will be required.
1. To take a test, blow and hum WHOOOOO
into the mouthpiece.
2. Stop blowing when the interlock beeps
three times.
3. As the interlock analyses the breath
sample, the screen will display ANALYSING.
12