Triumph TR2 Service Instructions Manual page 395

BODY
FIT OCCASIONAL SEATS
Slide the driver and passenger seats
forward to their fullest extent.
Lift up the carpet at the rear of the
two seats and remove the two bolts
and washers so exposed.
Make two small holes in the carpet to
align with the tappings in the floor
assembly.
Withdraw the two chrome headed
bolts and washers from the trim at the
rear of the Dassenger compartment.
(e) Position the occasional seat behind the
driver
and
passenger seats and secure
with
four
bolts removed during the
previous operations.
12.
TO REMOVE OCCASIONAL SEAT
(a) Withdraw the four attachment bolts
and plain ,washers.
(b) Remove the seat from the rear of the
passenger compartment.
(c)
Return the bolts and plain washers to
their tappings for safe keeping.