Advertisement
Tool Description
Cross Screwdriver
Six corner sleeve Screwdriver
Slotted Screwdriver
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Lay the monitor on the desk, push the quick relrases button.Separate the stand from display.
2.
Separate the four screws from Bucket.
3.
Separate frontbezel from bucket, over turn the display and turn the bucket，separate the speaker line.
4.
Separate the speaker from the bucket.
5.
Sperate the lync keypad Line from lync keypad.Separate the lyncpad from the front bezel.
6.
Sperate the camera from frontbezel.
7.
Take out the ACE Tape and Aluminum Foil, then separate the LVDs Cable. Move away the Speakers and Chassis.
8.
Unlock the 1 screws ,separate the USB chassis from main chassis.
9. Unlock the 9 screws and separate USB Shield from Chassis separate IF Board and Power Board from Chassis.
10. Unlock 2 screwS and separate the USB Board from USB shield.
11. Separate the Lines from PCB Board.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Below action which may easily damage product .please notice it
Lay the
N/A
monitor on
the desk,
push the
quick
relrases
button.Sepa
rate the
stand from
display.
Separate the
M4 Slotted
four screws
screwdriver
from
Bucket.
Separate
N/A
frontbezel
from
bucket,
over turn
the display
and turn the
bucket，
separate the
speaker
line.
Tool Size (if
applicable)
M2/M3/M4
M3
M4
Advertisement
