Download Print this page

HP EliteDisplay E240ce Disassembly Instructions

23.8-inch monitor

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay E240ce 23.8-inch Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Notes
With a surface greater than 10 sq cm
Power Board, USB Board, IF Board, Keypad
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
6
0

Advertisement

loading

Summary of Contents for HP EliteDisplay E240ce

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Tool Description Tool Size (if applicable) Cross Screwdriver M2/M3/M4 Six corner sleeve Screwdriver Slotted Screwdriver Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: Lay the monitor on the desk, push the quick relrases button.Separate the stand from display.
  • Page 3 Separate the speaker from the Cross bucket. Screwdriver Sperate the lync keypad Line from Cross lync Screwdriver keypad.Sep arate the lyncpad from the front bezel. Sperate the camera from frontbezel. Take out the ACE Tape and Aluminum Foil, then separate the LVDs Cable.
  • Page 4 Unlock 2 Cross screwS and Screwdriver separate the USB Board from USB shield. Separate the M3 Cross Lines from Screwdriver PCB Board.