Removing the protective grids .......................... 5 Location tips ..............................5 Attaching the fl at spikes ..............................6 Connecting ..................................6 Connecting the cables ............................ 6 Bass alignment .............................. 7 Care and cleaning .................................7 Protecting the environment ............................8 Technical data ................................8 • Ultima 800 Mk II...
PDF document, e.g. 4322543 2. Serial number or batch number Located on the back of the unit, e.g. serial number: KB20240129A-123. Many thanks for your support! • Ultima 800 Mk II...
Connector cables Right speaker Left speaker Due to differing customer requirements, the Ultima 800 Mk II speakers are shipped without connector cables. You can fi nd suitable cables in our webshop (www.teufelaudio.com) in the “Accessories” area. Stereo triangle...
Here you can connect the speaker cables with pin plugs, suitable furcated cable lugs or directly. We only describe the direct connection in these instructions. The terminal clips are each marked red (+) and black (-). • Ultima 800 Mk II...
You can modify the bass performance of your Bass Aligment Ultima 800 Mk II speakers in order to adjust the sound to the room conditions or the individual sound performance of your amplifi er. 3 terminal pairs are provided for this, which can be connected vertically with a bridge.
European Union guidelines 2004/108/EC and 2006/95/EC. Technical changes reserved! For questions, suggestions or criticism please contact our customer service department: Lautsprecher Teufel GmbH Tel.: +49 (0)30 - 300 930 0 No responsibility is assumed for the Gewerbehof Buelowbogen - Aufgang D1 correctness of this information.
Need help?
Do you have a question about the Ultima 800 Mk II and is the answer not in the manual?
Questions and answers