Tv Set; Headphones; Connecting To Power - Teufel CoreStation Technical Description And Instruction Manual

TV set

Connect your TV set or your video projector to the
HDMI TV jack (3). You will need a HDMI cable for this.
If your TV set does not transfer audio via HDMI ARC,
you can assign one of the audio inputs of the CoreSt-
ation to the TV set in the "Audio Mapping" menu (see
page 20).
The functions CEC and ARC are deactivated to save
energy when the product is delivered. If necessary,
please activate these functions via the menu (see
"HDMI" on page 21).

Headphones

You can connect Stereo headphones to the HEAD-
PHONE jack (7) with a 3.5 mm jack.
The speakers and the outputs of the power amplifiers
(11) and (12) will be automatically deactivated when
you connect the headphones.
WARNING
Risk of injury/damage!
Lower the volume before you pull out the headphone
plug out again; otherwise, the speakers may un-
expectedly "blare out" very loud sound. This could
injure your hearing or damage the device.

Connecting to power

1. Make sure that your active subwoofer and/or the
active speakers are switched off.
2. Insert the IEC power plug of the mains cable into
the jack (1).
3. Insert the mains plug into a mains power socket
(230 V ~ / 50 Hz).
3 7
12 11
1
• CoreStation 15