Setting the volume
You can change the volume with the VOLUME +/– but-
tons (21).
Mute
By pushing the
button (20), you can turn the sound
off and on again.
During muting, the power LED (19) will slowly pulse in
white and the message "Mute: On" will appear on the
connected TV set.
Adjusting the sound
Use the SOUND button (25) to adjust the sound.
1. Select the desired frequency range by repeatedly
pushing the SOUND button (25):
• Bass – low tones
• Treble – high tones
2. Use the set buttons ▲/▼ (22) to adjust the select-
ed frequency band from "–10" (decrease) to "+10"
(increase).
3. Finish the setting with the EXIT button (30).
Surround mode selection
Use the MODE button (29) to toggle the surround
mode for stereo sources in this order:
2.1 Stereo
5.1 Stereo
Dolby PLII Movie
Dolby PLII Music
Dolby Digital and DTS
Surround mode is locked for the playback of Dolby
Digital or DTS-coded multichannel tracks; thus the
MODE button (29) is not functional when such signals
are present.
18
• CoreStation
Stereo only via front left/right
and subwoofer
Stereo via all channels (up-
mix)
Dolby ProLogic II for movies
Dolby ProLogic II for music
30
29
20
21
22
25
19