Table of Contents
Advertisement
The CoreStation's software undergoes continual
development. You can load subsequent versions from
our website www.teufelaudio.com/support/.
Installing new software
You will need an empty USB stick with a FAT-32 file
system.
1. Load the new software from our website.
2. Unpack the downloaded file and save all files con-
tained to the USB stick.
3. Pull the mains plug of the CoreStation out of the
socket and wait about 5 minutes.
4. Insert the USB stick into the SERVICE jack (8).
Note
Risk of damage!
The CoreStation must not be switched off during the
following steps!
5. Insert the mains plug of the CoreStation back in the
socket.
The update will begin automatically. The function
LED (19) will blink in different colours during the
installation process.
6. Finally, the CoreStation will reboot.
7. Pull the USB stick out of the SERVICE jack (8).
The new software is now installed.
• Ideally, you should remove dust or small amounts of
dirt with a dry, smooth leather cloth.
• Use a damp cloth to rub off stubborn dirt. Make
sure that no liquid penetrates the housing.
• Then immediately wipe the damp surfaces off with
a soft cloth without applying pressure.
Software Update
Cleaning & Maintenance
Note
Risk of damage!
Using the wrong cleaning agents may damage the
delicate surface of the housing.
• If possible, only use plain water without any
additives. In case of stubborn marks, a mild soap
solution may be used.
• In no circumstances should caustic cleaning
products, white spirit, thinners, petrol or similar
be used for cleaning.
8
19
• CoreStation
25
Hide quick links:
Advertisement
Table of Contents
