Figure 5.4: Hardware install: step 4
The first part of the new driver is now installed. Click Finish
to close the wizard and start installation of the second part, which
follows identical steps.
Once the second part of the driver is installed. measurement soft-
ware can be installed and the Handyscope HS4 DIFF can be used.
5.3
Plug into a different USB port
When the Handyscope HS4 DIFF is plugged into a different USB
port, some Windows versions will treat the Handyscope HS4 DIFF
as different hardware and will ask to install the drivers again. This
is controlled by Microsoft Windows and is not caused by TiePie
engineering.
25
Hardware installation
Need help?
Do you have a question about the Handyscope HS4 DIFF-5MHz and is the answer not in the manual?