Table of Contents
Advertisement
Step 2 : Setting up the remote commander (continued)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
Controlling other TVs with the remote commander
(SLV-EZ727AZ only)
The remote commander is preprogrammed to control non-Sony TVs. If
your TV is listed in the following table, set the appropriate manufacturer's
code number.
1
Set •TV/VIDEO at the top of the remote commander to •TV.
2
Hold down ?/1, and enter your TV's code number using the
programme number buttons. Then release ?/1.
Now you can use the following TV control buttons to control your TV:
?/1, VOL +/–, PROG +/–, programme number buttons, -/-- (ten's digit) and
TV/VIDEO.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
Manufacturer
Sony
Akai
Ferguson
Grundig
Hitachi
JVC
Loewe
Mivar
NEC
Nokia
12
Getting Started
Code number
01, 02
68
52
10, 11
24
33
45
09, 70
66
15, 16, 69
Manufacturer
Code number
Panasonic
17, 49
Philips
06, 07, 08
Saba
12, 13
Samsung
22, 23
Sanyo
25
Sharp
29
Telefunken
36
Thomson
43
Toshiba
38
Hide quick links:
Advertisement
Table of Contents
