Step 2 : Setting up the remote
Inserting the batteries
Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote
commander
You can use this remote
commander to operate this
VCR and a Sony TV. Buttons
on the remote commander
marked with a dot (•) can be
used to operate your Sony TV.
If the TV does not have the
symbol near the remote
sensor, this remote
commander will not operate
the TV.
To operate
the VCR
a Sony TV
commander
Set •TV/VIDEO to
VIDEO and point at the remote sensor at the VCR
•TV and point at the remote sensor at the TV
Remote sensor
•TV/VIDEO
1
4
7
2
3
5
6
8
9
0
continued
Getting Started
11