Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha XT250 2009 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
1 removing the screws.
2
1
3
4
2
5
1. Tail/brake light lens
6
2. Screw
2. Remove the burnt-out bulb by
7
pushing it in and turning it counter-
clockwise.
8
9
EAU24133
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
Replacing a turn signal light
bulb
1
1. Turn signal light lens
2. Screw
[ECA10681]
7-32
1. Remove the turn signal light lens
by removing the screw.
1
2
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24204