PERIODIC MAINTENANCE AND ADJUSTMENT
place it if necessary.
2
1
1
2
3
4
1. Engine oil drain bolt
2. Washer
5
5. Remove the oil filter element drain
bolt to drain the oil from the oil filter
6
element.
7
8
9
1. Oil filter element drain bolt
TIP
Skip steps 6–8 if the oil filter element is
not being replaced.
6. Remove the oil filter element cover
by removing the bolts.
1. Oil filter element cover bolt
7-12
2. Oil filter element cover
7. Remove and replace the oil filter
1
element and O-rings.
TIP
Make sure that the O-rings are properly
seated.
2
1. Oil filter element
1
2. O-ring
8. Install the oil filter element cover by
installing the bolts, then tightening
them to the specified torque.
Tightening torque:
2
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
9. Install the engine oil drain bolt, and
then tighten it to the specified
1
2