Table of Contents
Advertisement
Honeywell
• 41
MR9 only: Now re-mount the main cover (unless you want to make the control
14
connections first).
Check the connection of the earth cable to the motor and the drive terminals
marked with
15
NOTE: Two protective conductors are required according to standard EN61800-
5-1. See chapter Earthing and earth fault protection.
Connect the protective conductor using a cable shoe and an M8 screw (included
in the
Accessories bag
Figure 39.
Figure 38.
.
) on either of the screw connectors as advised in
P
M4x10
OWER CABLING
Advertisement
Table of Contents
