First EMV100 800 Series Manual page 25

SERIES F3L
DIVERTING BRASS VALVE WITH ELECTRIC MOTOR DRIVEN ACTUATOR
CODE TYPE
10170 EMV ROTODIVERT F3L
10171 EMV ROTODIVERT F3L
10172 EMV ROTODIVERT F3L
10173 EMV ROTODIVERT F3L
TECHNICAL CHARACTERISTICS
EMV110 F3L actuator
Supply volatage ...................230V, 50Hz (EMV 110..4680)
.............................................* 24V, 50Hz (EMV 110..4683)
Limit switch ..........................5(1)A, 250V, 50Hz
Consumption .......................7.5VA during operation
Electrical connection ...........class II acc. to EN60355-1
Actuator protection class .....IP44 acc. to IEC 529
Rotation time .......................18s/90°
Output torque ......................max 8Nm
Ambient temperature ...........from 0° C do 50°C
Connecting cord ..................4 x 0.5 mm
Forged brass valve:
Max. operating temperature 110°C
Max. operating pressure ......6 bar
Torque .................................0.5 Nm
Special versions:
Reversion time ....................30s/90°
Max. output torque ..............10 Nm
Other data are the same.
MANUAL SETTING OF FLAP POSITION
Flap position is set with a screwdriver, coin or the like.
First check proper adjustment of the flap and then mount
the actuator.
DN A
15 1/2"
20 3/4"
25 1"
32 1 1/4"
3VA during standstill
2 , 2m long
B C D
72 18,5 116
72 18,5 116
90 24 122
90 24 122
Kvs for valves F3L DIVERT type
Characteristic of flow
valve's position
E K
VS
54 4 1,1
54 7 1,0
69 8,5 1,12
69 12 1,37
25
page