First EMV100 800 Series Manual page 24

Diverter motor driven valve of
EMV 110 F3L series
ROTODIVERT F3L
GENERAL:
Electric motor driven EMV110 actuator with installed
3-way brass valve operate as diverting or separating
element in closed systems of remote (warm water),
air blast or combined heating systems using either
of the sources, remote or air blast heating.
FEATURES:
• Compact version enables quick assembly and
electrical connection.
• Actuator is simply and quickly assembled and
disassembled from reversible valve by means of
"clip-clap"system, no screwing is required.
• Effectively and economically used as reversible
element in systems where two heating sources are
used or for supply of heating to two consumers -
heating and sanitary water.
• Dimensions of reversible valve from 1" to 1 1/4"
are suitable for systems with copper pipes
• Two-wire control with thermostat and other
devices
• Connecting cord enables external connection.
• Built-in relay enables SPST and SPDT connection.
• Quick replacement of O-rings without
disassembling the valve from installation.
24
page
FASTENING AND REMOVING THE
ACTUATOR 0N/FROM REVERSIBLE
VALVE
The actuator push perpendicular to valve so that iz
seats on carrying holders. The mounting is finished.
If you need to remove the actuator from the valve
simply pull it out.
M4 screw is inserted at the bottom of the
actuator and prevents removal of the actuator
from the valve by unauthorised person
Posibility of sealing the actuator to prevent
unauthorised person to interfere with it.
! ATTENTION !
Before an intervention inside the actuator,
disconnect power suply.
ID-4606-17RotodivertF3L-ang-v10-170290