Warning Indicators And Messages - Sony GV-HD700E Operating Manual

Warning indicators and messages

Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
You can fix some symptoms by yourself. If
the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
C: (or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
"InfoLITHIUM" battery pack. Use an
"InfoLITHIUM" battery pack (p. 81).
• Connect the DC plug of the AC
Adaptor to the DC IN jack of your
VCR securely (p. 13).
C:06:ss
• The battery pack is too warm. Replace
the battery pack, or remove it and put it
in a cool place.
C:21:ss
• Moisture condensation has occurred.
Remove the cassette and leave your
VCR for at least 1 hour, then re-insert
the cassette (p. 84).
C:22:ss
• Clean the head using a cleaning
cassette (optional) (p. 85).
C:31:ss / C:32:ss
• Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your VCR again.
Do not perform this procedure if
moisture condensation has occurred
(p. 84).
• Remove the power source. Reconnect it
and operate your VCR again.
• Change the cassette. Press the {RESET}
button (p. 90), and operate your VCR
again.
E:92:ss
• Turn on the power again to restore your
VCR by pressing {RESET} (p. 90).
101-1001(Warning indicator
pertaining to files)
• The file is damaged.
• The file is unreadable (p. 81).
E (Battery level warning)
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
(Warning indicator
pertaining to battery pack
temperature)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
(Warning indicator pertaining to
battery pack temperature)
• The battery pack is too cold. Replace
the battery pack, or remove it and put it
in a warm place.
% (Moisture condensation warning)*
• Eject the cassette, remove the power
source, and then leave it for about 1
hour with the cassette compartment lid
open (p. 84).
73
Continued ,