Locating A Scene On The Tape; Locating A Desired Scene Quickly (Zero Set Memory) - Sony GV-HD700E Operating Manual

Recording the picture from TV,
VCR, etc. (Continued)
• When you record the picture from a tape
recorded in the HDV and DV formats by setting
[HDV/DV SEL] to [AUTO], the picture and
sound are temporarily interrupted when the
signal switches between the HDV and DV
formats.
• To record the part recorded in the HDV format
on the tape in the HDV and DV formats, set
[HDV/DV SEL] to [HDV] on the VCR. To
record the part recorded in the DV format, set
[HDV/DV SEL] to [DV] on the VCR (p. 56).
The rest of the parts recorded in the undefined
format will remain unrecorded then.
• When you also use the another GV-HD700/1,
GV-HD700E/1 for playback, set [HDV/DV
SEL] to [AUTO] on the GV-HD700/1, GV-
HD700E/1 for playback as well.
• Note the following when connecting with an
i.LINK cable:
– During recording, the color of the display may
look uneven. However, this does not affect
the recorded picture.
– The recorded picture becomes rough when a
picture is paused on the devices for playback
while recording to the VCR.
– If you restart recording after pausing or
stopping the VCR, the picture may not be
recorded smoothly.
– Data codes (date/time/camera settings data)
may not be recorded depending on the
connected device or application.
– You cannot record the picture and sound
separately.
• When recording is performed using the Remote
Commander, the other VCR may malfunction.
In this case, change the commander code to
other than VTR2 on the other VCR or cover the
sensor of the other VCR with black paper.
• If you use the fast forward or the slow playback
function on the VCR when connecting with an
A/V connecting cable with S VIDEO, the
picture being recorded may fluctuate.
32
Locating a scene on
the tape
You can locate a desired scene on the tape
using the Remote Commander.
b Notes
• For more details about the Remote Commander,
see page 22, 93.
Locating a desired scene
quickly (Zero set memory)
1
During playback, press ZERO
SET MEMORY 4 at a point you
want to locate later on.
The tape counter displays "0:00:00" and
appears on the screen.
If the tape counter is not displayed,
press DISPLAY 3.
2
Press STOP 7 when you want to
stop playback.