Table of Contents
Advertisement
Quickly locating a scene
– Zero set memory
Your VCR goes forward or backward to stop
automatically at a desired scene having a counter
value of "0:00:00".
Use the Remote Commander supplied with a
Sony digital video camera recorder for this
operation.
For details, refer to the operating instructions of
the digital video camera recorder.
Use this function, for example, to view a desired
scene later on during playback.
(1) Press DISPLAY during playback.
(2) Press ZERO SET MEMORY on the Remote
Commander at the point you want to locate
later. The counter shows "0:00:00" and the
ZERO SET MEMORY indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter's
zero point. The tape stops automatically
when the counter reaches approximately
zero. The ZERO SET MEMORY indicator
disappears and the time code appears.
(5) Press N. Playback starts from the counter's
zero point.
34
DISPLAY
x
m
N
ZERO SET MEMORY
Advertisement
Table of Contents
