Information On The Screeon; Indexing Tape Content; Locating A Particular Scene Later; Listening More Easily To Conversation Recorded With A - Sony Hi8 EV-S2000 Operating Instructions Manual

Notes on counter reading
* The counter does not work on
the video tape portions on
which no recording has been
made.
* After a cassette is ejected, the
counter reading is retained.
When a cassette is inserted in
the VCR, the counter reading
automatically returns to
"OHOOMOOS'.
® The linear time counter
installed in this VCR is not a
clock. There is a difference
between the actual recording
and playback time, and the
counter display. This
difference may increase when
switching the tape speed from
SP to LP and vice versa, or
depending on the portion of
the transported tape.
3 2 Basic Operations
nana are
Information on the Screen
To turn off or call up the information on the TV screen, press DISPLAY on the
Remote Commander.
Linear time counter
Tape operation mode
When the information does not appear on the TV screen
Check to see that the LINE OUT 1 or 2 jacks are connected to the line input jacks
of the TV. If you connect your TV to the LINE OUT jacks, the data screen won't
appear.
Indexing Tape Contents
Before recording or playback, press COUNTER RESET to reset the counter to
zero. The counter installed in the VCR is called a "linear time counter', which tells
you how much the tape has run in terms of time. By noting the setting, you can find
that point later by referring to the counter. Use the label on a cassette to list the
programs and their counter readings.
Locating a Particular Scene Later
If you want to return to a particular scene later, press COUNTER RESET at the
desired scene so that the linear time counter is set to "OHOOMOO0S".
To return to the desired scene
Press TAPE RETURN on the Remote Commander while the VCR is in stop mode.
The tape rewinds to the position where the counter reads "OHOOM00S", and stops.
To start playback of the scene
Press > PLAY.
Listening More Easily to Conversation
Recorded with a Camcorder
When you press VB (VOICE BOOST) while playing back a tape recorded with a
camcorder, human voice portion of the sound will be enhanced so that it is easier
to listen to conversation. This reduces the sound of wind and other "unwanted"
background noise.
Bie RAS eee e te
AD APO re. oie ates