Table of Contents
Advertisement
p> PLAY
COUNTER
RESET
DUAL MODE
SHUTTLE ring
TAPE
VOICE
RETURN
80OST
AUDIO
MONITOR
>
Notes on counter reading
12
The counter does not work on
unrecorded portions of the tape.
After a cassette is ejected, the
counter reading is retained. When
a cassette is inserted in the VCR,
the counter reading automatically
returns to "OHOOMOOS."
The linear time counter installed in
this VCR is not a clock. There is a
difference between the actual
recording and playback time, and
the counter display. This difference
may increase when switching the
tape speed from SP to LP and
vice- versa, or depending on tape
position being played back.
Basic Operations
Indexing the Tape Contents
Before recording or playback, press COUNTER RESET to reset the counter to zero.
This counter is a "linear time counter," which shows you how much the tape has run in
terms of time. By noting the setting, you can find that point later by referring to the
counter. Use the label on a cassette to list the programmes and their counter
readings. Since the counter is not very accurate, use it only for reference.
Locating a Particular Scene Later
If you want to return to a particular scene later, press COUNTER RESET
on the VCR at the desired scene so that the linear time conter resets to
"OHOOMOOS."
To return to the desired scene
Press TAPE RETURN on the Remote Commander while the VCR is stop
mode.
The tape rewinds to the position where the counter reads "OHOOMOOS",
and stops.
To start playback of the scene
Press ® PLAY.
When you press VOICE BOOST on the Remote Commander while playing back a
tape recorded with a camcorder, the human voice portion of the sound is enhanced
so that it is easier to hear conversation. VOICE BOOST reduces the sound of wind
and other "unwanted" background noise.
You can select the sound you want to hear when you play a bilingual tape.
Press AUDIO MONITOR on the Remote Commander. With each press, you can
select main sound, sub sound, or main and sub sound. The monitor sound indicators
will tell you what sound you are selecting.
When you playback a monaural tape, the indicator will not light up and the button will
become inoprative.
Lighted monitor sound indicators
on the VCR front panel
If you record the bilingual programme in the stereo mode,
the programme can be played back in main (L) or sub (R) sound by pressing
AUDIO MONITOR.Even if you select only one channel (right channel or lett
channel), the slight sound of unselected channel will be heard.
Advertisement
Table of Contents
