Pneumatic Data - Siemens SIPART PS2 Compact Operating Instructions

● Transport
● Operation
2)
Impact energy max. 1 joule for enclosures with inspection window 6DR5..0and 6DR5..1.
1)
At ≤ -10 °C (≤ 14 °F), the display refresh rate of the display is limited. When using Iy module, only T4 is permissible.
2)
-20 ... +80 °C (-4 ... +176 °F)for 6DR55..-0G..., 6DR56..-0G..., 6DR55..-0D...and 6DR56..-0D...
3)
See also
Certificates, approvals, explosion protection (Page 37)
7.1.2

Pneumatic data

Auxiliary power (air supply)
● Pressure
Air quality in accordance with ISO 8573-1
● Solid particulate size and density
● Pressure dew point
● Oil content
Unrestricted flow (DIN 1945)
● Inlet air valve (ventilate actuator)
2 bar (29 psi)
4 bar (58 psi)
6 bar (87 psi)
● Air exhaust valve (depressurize drive)
2 bar (29 psi)
4 bar (58 psi)
6 bar (87 psi)
Valve leakage
Throttle ratio
Auxiliary power consumption in the controlled state
When using device version Ex d (6DR5..5-...), values are reduced by approximately 20%.
1)
7.1.3 Constructional design
How does it work?
● Range of stroke (linear actuator)
● Angle of rotation (part-turn actuator)
Mounting method
● On the linear actuator
● On the part-turn actuator
Weight, basic device
● Glass-fiber reinforced polycarbonate housing
● Aluminum enclosure
SIPART PS2 (6DR5...)
A5E03436683-02, 01/2013
1)
)
1
2K4, but -40 ... +80°C (2K4, but -40 ... +176°F)
4K3, but -30 to +80 °C (4K3, but -22 to +176 °F)
Compressed air, carbon dioxide (CO2), nitrogen (N), noble
gases or cleaned natural gas
1.4 to 7 bar (20.3 ... 101.5 psi)
Class 2
Class 2 (min. 20 K (36°F) below ambient temperature)
Class 2
4.1 Nm³/h (18.1 USgpm)
7.1 Nm³/h (31.3 USgpm)
9.8 Nm³/h (43.1 USgpm)
8.2 Nm³/h (36.1 USgpm)
13.7 Nm³/h (60.3 USgpm)
19.2 Nm³/h (84.5 USgpm)
< 6⋅10 Nm³/h (0.0026 USgpm)
-4
Adjustable up to ∞: 1
< 3.6⋅10 Nm³/h (0.158 USgpm)
-2
3 to 130 mm (0.12 ... 5.12") (angle of rotation of the
positioner axis 16 to 90°)
30 to 100°
Using the mounting kit 6DR4004-8V and, if required, an
additional lever arm 6DR4004-8L on the actuators as per
IEC 60534-6-1 (NAMUR) with a fin, columns, or a plane
surface.
Using the mounting kit 6DR4004-8D on the actuators with
fastening plane as per VDI/VDE 3845 and IEC 60534-6-2:
The required mount must be provided on the actuator-
side.
Approximately 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
3)
35