Towing with a raised front axle
Danger.
The ignition switch must not be switched
to position 2 while the front axle is
raised. The wheels on the driven axle
may lock. Failure to comply could result
in brake intervention by the ABS/ASR
system, which could cause the rear axle
to skid.
Front towing coupling
M88_00-0093-71
Grasp handle recesses (2) with both
hands and open front flap (1).
Front towing coupling
M88_00-0094-71
Release the clip securing the towing
coupling and pull out linchpin (2).
Remove the lower section of front
flap (1) in the direction of travel.
CONECTO (C628.3--)/08.2007 GB
Operation
23