Passenger-Compartment Temperature - Changing The Base Value - Mercedes-Benz Conecto Manual

M83.00-0124-01
Press pushbutton (11.6).
Dehumidified air is delivered from the
air vents.
The indicator lamp in pushbutton
(11.6) lights up.
Note:
The reheat function remains active for a
maximum of approximately 30 minutes.

Passenger-compartment temperature - changing the base value

Press pushbutton (11.6) again.
The reheat function is switched off.
The air delivered from the air vents is
no longer dehumidified.
The indicator lamp in pushbutton
(11.6) goes out.
Heating/ventilation/air-conditioning
Passenger-compartment tem-
perature - changing the base
value
Note:
Precondition: electrical system on.
Note:
To make it possible to change the tem-
perature in the passenger compartment if
necessary, the base value setting can be
changed at the control panel. The base
value programmed as the default for the
temperature in the passenger compart-
ment and assigned to temperature con-
trol pushbutton (11.4) is 24 °C. It can
be increased to a maximum of 28 °C or
reduced to a minimum of 20 °C in incre-
ments of 2 °C.
CONECTO (C628.3--)/08.2007 GB
175