Mercedes-Benz Conecto Manual page 259

Setting values
Designation Value
Spray angle of the 25°
flat jet nozzle at
least
Caution:
Round-spray jets and power-concentrated
jets must not be used. The effect of the
water jet on these tools is too aggress-
ive for cleaning the bus and could cause
serious damage to the bus.
Note:
The nozzle spraying angle determines
the level of cleaning. The greater the
nozzle spraying angle, the more protec-
tion offered when cleaning.
Set the water pressure, water tem-
perature and the concentration of the
cleaning product on the high-pres-
sure cleaner.
Setting values
Designation Value
60 bar
Maximum permiss-
ible water pressure
Setting values
Designation Value
Maximum permiss- 60 °C
ible water temper-
ature
Caution:
The protective coating on the underbody
or components may be damaged if the
water pressure and/or water temperature
are too high or a wrong spray nozzle is
fitted.
Practical advice
Cleaning the underbody
Caution:
The addition and concentration of the
cleaning products should be adjusted ac-
cording to the type and level of dirt on
the area to be cleaned. Excess cleaning
product can cause damage.
Turn on the water jet pointing it to-
wards the ground or open-air and
then move it onto the surface to be
cleaned. Maintain the maximum per-
mitted jet distance.
Setting values
Designation Value
Spray distance from 30 cm
the object at least
CONECTO (C628.3--)/08.2007 GB
249