Mercedes-Benz Conecto Manual page 196

Heating/ventilation/air-conditioning
Auxiliary heating operation (option)
M83_00-0730-71
Control of the clock was designed in
such a way that all flashing symbols
can be adjusted using buttons (4)
and (5). The displayed time is stored
if 5 seconds pass without a switch
being pressed. Fast mode is enabled
when buttons (4) and (5) are pressed
down for longer than 2 seconds.
Switch on the auxiliary heating with
digital timer: press button (3).
The auxiliary heating is switched on
manually.
186
CONECTO (C628.3--)/08.2007 GB
Switch off the auxiliary heating:
press button (3) again.
The auxiliary heating is switched off
manually.
Call up the time with the ignition
switched off: press button (1).
Set the time or day: press down but-
ton (1) for longer than 2 seconds
Time (6.3) flashes.
Adjust the time with buttons (4) and
(5).
Now the weekday (6.2) flashes, it can
be adjusted with buttons (4) and (5).
Program the start of heating (preset
time): press button (2).
Storage location 1 (6.4) flashes.
Adjust the time with buttons (4) and
(5).
Weekday (6.2) flashes.
Adjust the weekday with buttons (4)
and (5).
Time (6.3) flashes.
Note:
Storage locations 2 and 3 (6.4) can be
adjusted using the same procedure by
repeatedly pressing button (2).
M83_00-0730-71
Display preset times: repeatedly
press button (2) until the required
storage location is displayed.