Malfunction Displays: Red Warning Level - Description - Mercedes-Benz Conecto Manual

Malfunction displays: red warning
level - description
M54_00-1362-71
A malfunction that is signalled by red
warning lamp (3) immediately causes the
malfunction display to be shown on the
screen. Malfunction displays with red
warning lamp (3) remain active on the
screen until the malfunctions have been
rectified. The malfunction display cannot
be cleared if the red warning lamp is lit.

Malfunction displays: red warning level - description

Danger.
Risk of accident. Red warning level mal-
functions (3) indicate that the operating
safety or roadworthiness of the bus is at
risk. The driving and braking characterist-
ics of the bus may change. The bus must
be stopped immediately (traffic conditions
permitting) and an EvoBus Service Partner
must be notified.
Danger.
Risk of accident. If the rear car begins
to swing from side to side, the bus must
be stabilised by braking. If a malfunction
occurs in the anti-jackknifing protection
system (red warning lamp in conjunction
with the "Anti-jackknifing protection" sym-
bol), it is permissible to drive the bus as
far as the nearest workshop but only in
exceptional cases, in favourable weath-
er conditions (non-skid road surface) and
at a speed of no more than 12 mph (20
km/h). In all other cases the bus must
be towed.
Driver's area controls
CONECTO (C628.3--)/08.2007 GB
117