80-Hour Inspection Checklist - Stanley Labounty MDP Series Safety, Operation & Maintenance

80-HOUR INSPECTION CHECKLIST

Build-up, hard-surfacing & Blade Rotation
______ Build-up jaws & check wear plates (see "Build Up & Wear Plates" on page 19).
______ Rotate blades (see "Blade Maintenance" on page 22).
Rotator
______ Inspect and torque turntable bearing bolts (see "Inspect / Torque Bolts" on page 19).
Inspected By: _______________ Date: ________________
EVERY 1500 HOURS
______ Inspect / replace thrust washer (see "Thrust Washer Inspection - MDP 20/27/35/50" on page 24)
Inspected By: _______________ Date: ________________
MDP Operation & Maintenance Manual | 15