Maintenance; 8-Hour Inspection Checklist - Stanley Labounty MDP Series Safety, Operation & Maintenance

MAINTENANCE

8-HOUR INSPECTION CHECKLIST

Inspect all safety devices
______ Safety decals are in place an legible (see "Decals & Terms" on page 6)
______ Cab protection is in good condition.
______ Excavator warning systems are working.
Visually inspect for damage
______ Check for physical damage to the attachment, jaws, hoses and fittings.
______ Check for damage to the Jaw Teeth (see "Jaw Teeth Maintenance" on page 16).
Lubricate all points
______ Lubricate (see "Lubrication" on page 17 & "Turntable Bearing Lubrication" on page 18).
Inspect bolts and hydraulic fittings
______ Inspect bolts and fittings on attachment & jaws (see "Inspect / Torque Bolts" on page 19).
Inspect connecting pins and retaining hardware
______ Arm Connection.
______ Link connection.
______ Front and rear cylinder pins.
______ Main pivot group pin.
Inspected By: _______________ Date: ________________
14 | MDP Operation & Maintenance Manual