General Operation; Pinouts; Power Pins; I2C Pins - Mcube MC3635 Quick Start Manual And Demo

MC3635 3-Axis Accelerometer

1 GENERAL OPERATION

1.1 PINOUTS

1.2 POWER PINS

• DVDD – 3.3V Power Supply Input
• GND – Ground Pin for Power and Logic
• R7: The current drawn the sensor can be measured by putting an ammeter in
place of R7.

1.3 I2C PINS

• Connect the SCL (I2C clock pin) to your microcontroller's I2C clock line.
• Connect the SDA (I2C data pin) to your microcontroller's I2C data line.
mCube Proprietary.
© 2018 mCube Inc. All rights reserved.
EV3635A Quick Start Guide and Demo
APS-045-0017v1.1 3 / 17