Mcube MC3635 Quick Start Manual And Demo page 13

MC3635 3-Axis Accelerometer
The following is a schematic detailing how to set up the accelerometer for I2C protocol.
Please kindly refer to the resistor settings as:
o R7 = 0R (Jumper)
o R1 = 4.7KΩ
o R3 = 4.7KΩ
R4, R5 = 4.7KΩ (optional)
o
R2,R6 = DNI.
o
The physical location of the resistor is in the diagram in Section 8.
mCube Proprietary.
© 2018 mCube Inc. All rights reserved.
EV3635A Quick Start Guide and Demo
APS-045-0017v1.1 13 / 17