Sony RM-VL700 Operating Instructions (primary manual) Operating Instructions Manual page 25

1
Press SET.
All Component Select buttons
flash.
2
While holding MUTING
pressed, press VOL + or
VOL –.
To set all volume controls to
AMP
Press VOL+ while holding
MUTING pressed.
All Component Select buttons
light up when you press these
buttons, and then turn off
when you release them.
When you press VOL+ holding
MUTING pressed.
The buttons turn off when you
release them.
Volume control setting
complete.
To set only the audio
components' volume controls
to AMP
Press VOL– while holding
MUTING pressed.
Only AMP lights up when you
press these buttons, and then
turns off when you release
them.
When you press VOL-holding
MUTING pressed.
The buttons turn off when you
release them.
Volume control setting
complete.
Visual components are:
TV, video cassette recorder,
analog cable box, digital cable
box, digital satellite, DVD
player
Audio components are:
CD player, MD player,
cassette deck, amplifier
To cancel setting, press SET.
Note
If you used the Learning function to
program the VOL +/– or MUTING
buttons to send a signal to a
component, the procedure above will
not change the function of the VOL +/–
and MUTING buttons.
25