To Control The Volume - Sony RM-VL700 Operating Instructions (primary manual) Operating Instructions Manual

2
Press any Player Control
button.
See "Table of Preset Functions"
(page 35) for the functions of
buttons for each component.
Note
The remote control signals may be
different for some components or
functions. In this case, program the
remote control signals with the
Learning function (see page 15). Note,
however, that components and
functions that do not support the
remote control of infrared signals will
not work with this Commander.

To control the volume

Press VOL +/– to control the
volume. Press MUTING to mute
the sound. When you select a
visual component, the TV's
volume will be controlled (TV
lights up), and when you select an
audio component, the amplifier's
volume will be controlled (AMP
lights up). You can change this
setting also (page 24).
Notes
• If you used the Learning function
(page 15) to program the VOL +/– or
MUTING buttons to send a signal to
any other component, that signal will
be transmitted instead of the volume
or muting of the TV or amplifier
when you select that component.
• If you used the Learning function
(page 15) to program the VOL +/– or
MUTING buttons for the TV or AMP
to send a signal to any other
Component, that signal will be
transmitted only when you select TV
or AMP. When you select another
component, the preset volume control
signals for TV or AMP will be
transmitted.
• If you have assigned another
component to the TV or AMP buttons
(page 27), the volume of the TV or
amplifier cannot be controlled even if
you select another component.
Continued
13