Diagnostics Commands - Siemens SENTRON 5TT7 System Manual

Further information

3.3 Diagnostics commands

SMS command
evlog<email>
evclr
ailog<email>
aiclr
timedon
timedo()
clrtimedon
clrtimedo()
timedin
timedi()
clrtimedin
clrtimedo()
wreset
rmdo
ccf<email>
cdc
meson
mesoff
help
imei
startapp
PORTAL<ip>:<port>
DEBUG<ip>:<port>
3.3 Diagnostics commands
HELLO
RST
MPWR
UIn
Donx
50
Description
The event log is sent to the specified email
address.
The event log is erased.
The AI log is sent to the specified email
address.
The AI log is erased.
The operating hours counter of the digital
output n is queried.
The operating hours counters of all digital
outputs are queried.
The operating hours counter of the digital
output n is reset.
The operating hours counters of all digital
outputs are reset.
The operating hours counter of the digital input
n is queried.
The operating hours counters of all digital
inputs are queried.
The operating hours counter of the digital input
n is reset.
The operating hours counters of all digital
outputs are reset.
The device is reset.
Several (all) digital outputs are read out.
The configuration file is sent to the email
address.
The data connection is checked.
Sending of messages is activated.
Sending of messages is deactivated.
A list of all SMS commands is queried.
The IMEI number is queried.
App use is configured.
Portal use is configured.
The remote diagnostics function is configured.
alive call, module answer with "world"
Module Reset
Module voltage (Volt)
Query UI number n, "0" for all
Set DO number n to status x, "0" for all
More information
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
Log chapter (Page 41)
System Manual, 06/2014, 2541304131-01
GSM alarm module