Advertisement
Ball valves fully welded
Installation and Maintenance Instructions
Section 5 - Valve Removal
If the valve needs to be removed from the line for some extraordinary reason, the user should
ensure the following:
Warning
Depressurize the line before starting any maintenance. Failure to do so may cause serious
personal injury and/or damage to the valve.
1. The valve is depressurized;
2. The pipe shall be cut as far away from the valve as possible.
Section 6 - Greases and Special Tools
6.1 Sealant Greases
The suggested sealant grease is MOLYCOTE 111, valve lubricating and sealing silicone compound
by DOW CORNING.
6.2 Special Tools
The only suggested tool is the conical ring suitable for the gasket assembly.
Emerson reserves the right to change the contents without notice
page 6
Advertisement
