Programming The Function Keys; Configuring Function Keys - Siemens HIPATH 500 User Manual

Programming the function keys

Step by step
Assign telephony function
Prog. feature key
Change key
More features
Shift Key
Save incomplete
End
Another key
56
Programming the function keys
You can program frequently used functions, station
numbers or procedures onto the function keys on your
OpenStage 15 T or key module.

Configuring function keys

See also
A list of all available functions is displayed, see
the overview
Example: Programming the Shift key
S
Hold down the key shown.
Confirm the option shown.
or
N
Open the Program/Service menu
Select and confirm the option shown.
S
Press the key shown.
Confirm the option shown.
g
Select and confirm the option shown.
Confirm the option shown.
if nec.
Select and confirm the option shown.
Some functions (e. g. with "Call forwarding") cannot be
saved completely. This means that when later initiating
the function by pressing the button, further inputs are
required.
Confirm the option shown.
or
Select and confirm the option shown.
The LED displays
status of the function.
page 13.
page 57.
page 13 and
page 18.
page 57 show the