Programmable Function Keys - Siemens HIPATH 500 User Manual

Programmable function keys

Your OpenStage 15 T has eight illuminated keys to which you can assign
functions or numbers.
Increase the number of programmable function keys by connecting
a key module
Peter Fox
Destinations?
Depending on how they are programmed, you can use the keys as:
• Function keys
• Repdial/Direct station selection key
Each key can be programmed with one function.
The configuration of direct station selection keys must be activated
by your service personnel.
Direct station selection keys can be assigned an internal number
from the HiPath 4000 network.
Press the key briefly to activate the programmed function or dial the stored
number.
Hold the key to open the key programming menu
Your OpenStage is delivered with label strips. Write functions or names in
the white fields on the label strips.
The status of a function is shown by the LED on the corresponding func-
tion key.
Meaning of LED displays on function keys
LED
S
Off
T
[1]
Flashing
R
On
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
Getting to know your OpenStage phone
page 11.
page 56
Meaning of function key
The function is deactivated.
The function is in use.
The function is activated.
page 61
page 56.
13