Displaying And Assigning Call Charges; Displaying Call Charges (Not For U.s.) - Siemens HIPATH 500 User Manual

Sony telephone user manual
Hide thumbs Also See for HIPATH 500:
Table of Contents

Advertisement

Step by step
*65=Show call charges?
Displaying and assigning call
charges

Displaying call charges (not for U.S.)

For the current call:
Call charges are shown by default on the display when
a call ends.
If you want to display call charges as they occur during
a chargeable call, your service personnel must request
this option from the network operator.
Call charge display must be requested from the net-
work operator and configured by the relevant service
personnel.
Depending on the setting, call charges are displayed du-
ring or after a call.
Depending on the network operator, free external calls
are also displayed. The message "Free of Charge" ap-
pears on the screen either before or during the call.
If the cost indication facility has not been installed, the
display will show the dialed number and/or the length of
the telephone call.
If a call is forwarded, call charges are assigned to
the destination of the call transfer operation.
For all calls and for the last call
Connection charges for the last chargeable call made
are displayed first. After five seconds, the accumulated
connection charge (total) is displayed.
N
Press the key shown.
Select and confirm the option shown
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)"

Displaying and assigning call charges

[1]
.
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 3000Hipath 5000Openstage 15 t

Table of Contents