Alarm Reset - Siemens Expert Series Operating Note

Alarm Reset

7.4
During remote mode, a pending STL alarm can be acknowledged and deleted via
command "Alarm Reset"..
q Master telegram:
Structure of the alarm reset message:
...4 5
... Identification
Byte 5:
q Slave telegram
...4 5
... Identification
Byte 5:
Operating note KS 50-1 TCont
6
Instead of identification 41h (‚A'), identification 52h (‚R') Alarm Reset
is sent. Sending and handling of the remaining parameters are as in the
standard protocol (see page 16)
6
Identification 72h (‚r') instead of 41h (‚A') is sent. The remaining
functions are as in the standard protocol (see page 17 ).
Protocol for tempering equipment
... 12
Message
... 17
Message
19
13+14
Checksum
18+19
Checksum
Alarm Reset