Other Operations - Sony TA-E9000ES Operating Instructions (primary manual) Operating Instructions Manual

Other
Operations
This chapter describes the operations
necessary to store your custom
equalization and surround settings for
instant recall.
MAIN MENU
STANDBY
VIDEO 1 VIDEO 2 VIDEO 3 LD DVD
U
MAIN MENU
MENU + / –
SP SET UP EQ
PHONES
EQUALIZER BANK AUTO FORMAT
–
MENU
+/–
EQUALIZER BANK
Brief descriptions of buttons used to
create custom equalizer settings
EQUALIZER BANK button: Press repeatedly to select the
equalizer you want to adjust.
MAIN MENU button: Press repeatedly to select the
desired menu (<SURROUND> or <EQUALIZER>).
MENU knob: Turn to select a parameter from the current
menu.
+/– knob: Turn to adjust the selected parameter.
Viewing detailed information about the audio source
You can view information about the audio source currently
selected. When a digital audio source is selected, the
sampling frequency and bit rate of the audio signal can also
be viewed. (Items which can be displayed may differ
depending on the source.)
Turn +/– counterclockwise to display the audio information
(except during menu operations). Then turn +/– in either
direction to scroll the information.
Turning +/– immediately after pressing MODE +/– adjusts
surround modes. About two seconds after using MODE +/–,
you can use +/– to display the audio information. Also, after
using INPUT SELECTOR, etc., you can turn +/– to display
the audio information when the surround display returns.
TV TAPE MD/DAT CD TUNER PHONO
DIGITAL/ANALOG
INPUT SELECTOR
SURR LEVEL CUSTOM
MODE 2ch AUDIO SPLIT
+
39 GB