Other Specifications - Sony XM-754HX Operating Instructions Manual

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
Other Specifications
Circuit system OTL (output transformerless) circuit
Pulse power supply
Inputs RCA pin jacks
High level input connector
Outputs Speaker terminals
Speaker impedance
1* - 8 Q (stereo)
2* - 8 Q (when used as a bridging
amplifier)
Maximum outputs (HI-CURRENT / HI-VOLTAGE)
Four speakers:
90/170 W x 4 (at 402)
Three speakers:
90 W x2 +250 W x 1 / 170W x2+
400 W x 1 (at 4 N)
Two speakers:
250/400 W x 2 (at 4 Q)
Rated outputs (HI-CURRENT / HI-VOLTAGE)
(supply voltage at 14.4 V)
Frequency response
Four speakers:
35/75 W x 4 (20 Hz - 20 kHz, 0.04 %
THD, at 4 ()
50/100 W x 4 (20 Hz - 20 kHz, 0.1 %
THD, at 2 2)
Two speakers:
100/200 W x 2 (20 Hz - 20 kHz, 0.1 %
THD, at 4 Q)
5 Hz - 50 kHz (dB)
Harmonic distortion 0.005 % or less (at 1kHz, 4 Q)
Input level adjustment range
0.2 - 4.0 V (RCA pin jacks)
0.4 - 8.0 V (High level input)
High-pass filter 50 - 200 Hz, -12 dB/oct
Low-pass filter 50 - 200 Hz, -12 dB/oct
Low boost 0 - 10 dB (40 Hz)
Power requirements 12 V DC car battery
(negative ground)
Power supply voltage 10.5-16V
Current drain at rated output: 40 A
(4Q HI-VOLTAGE mode)
Remote input: 1.5 mA
Dimensions Approx. 258 x 50 x 320 mm
(w/h/d) (10 '/4 x2 x 12 °/s in.) not
incl. projecting parts and controls
Mass Approx. 3.5 kg (7 Ib. 11 oz.) not incl.
accessories
Supplied accessories Mounting screws (4),
Terminal cap (1)
Optional accessories Connecting cord for power amplifier
RC-46
Design and specifications are subject to change without
notice.
* HI-CURRENT only