Introduction; Features - Michell Instruments XZR200 User Manual

XZR200 User's Manual
1

INTRODUCTION

The XZR200 measures the partial pressure of O
sensor cell in Safe Area (general purpose) applications.
This user manual will show you how to measure oxygen using the XZR200 oxygen
analyzer.
In the following sections you will learn about:
• Zirconium Dioxide technology
• Analyzer components
• Installation
• Operation
• Calibration
Please read the manual carefully and pay particular attention to any safety warnings
and notifi cations.
Note: Warnings and items of importance will be marked with bold text.
1.1

Features

• Accurate linear confi gurable outputs: 4-20mA & 0-10 V DC or RS232
• Selectable output measurement ranges: Standard ranges of 0 to 25% O
and 0 to 100% O
100% O
• Externally triggered automatic or manual calibration
• Calibrated in ambient air (20.7% O
• Cycling 3.3 V DC logic output allows direct monitoring of the O
pump cycle for diagnostic purposes
• Selectable output fi ltering allows adaptive, fast and dynamic, or slow and
stable output
• IP65 die-cast aluminum case with stainless steel probe 210mm (8.27") or
400mm (15.75")
Michell Instruments
or fully adjustable via RS232 when confi gured in 0 to
2
mode
2
utilizing a Zirconium Dioxide (ZrO
2
) or in any other known O
2
INTRODUCTION
2
concentration
2
sensor
2
)
2
1