Rear Panel Controls, Indicators, And Connectors For Dmg1000 Models; Dc Power Connector; Diagnostics Connector; Rear Panel - Dmg1000 Models - Dialogic 2000 Series Getting Started Manual

1.2 Rear Panel Controls, Indicators, and Connectors for
DMG1000 Models
The rear panel controls, indicators, and connectors, Figure 2, include:
•

DC POWER Connector

DIAGNOSTICS Connector

•
• PBX PORT Connectors
• LAN (Ethernet) Port
• TX/RX/FULL/100 Indicators
RESET Switch
•
Figure 2. Rear Panel - DMG1000 Models
DC POWER
1.2.1 DC POWER Connector
The DC POWER connector is a 5-pin DIN connector that accepts the mating plug from the Power
Supply Unit DC output cord.
1.2.2 DIAGNOSTICS Connector
The DIAGNOSTICS connector is a female DB-9 connector that provides for connecting to the
PBX serial interface, permitting call party information to be passed by the PBX to the DMG1000.
Table 1 shows the connector pin designations.
®
Dialogic 1000 and 2000 Media Gateway Series Getting Started Guide
Dialogic Corporation
1 2
DIAGNOSTICS
Controls, Indicators, and Connectors
4
3 5 6 7 8
PBX PORTS
TX
RX
FULL
100
LAN
RESET
17