Statiflex 800 Dual Arm - Lincoln Electric Statiflex 800 Operator's Manual

STATIFLEX ® 800
Step : 4
• Mount the SF2400 fan. Refer Figure A.7 and manual provided
with the fan. Maintain the axis alignment between the inlet of
the Statiflex filter unit and outlet of the fan.
Step : 5
• Install the 8 in. sealing ring on inlet flanges of the Statiflex Unit.
• Fit the 8 in. diameter connection hose over the sealing ring on the
inlet flange and secure them with a 8 in. diameter hose clamp and
rubber sealing band (not shown). Half the band should cover the
end of the hose, and half the band should cover the inlet flange.
FIGURE A.4
SEALING RING
HOSE CLAMP
HOSE
Step : 6
Fit the other ends of the 8 in. connection hose over the 8 in. diameter
reducer and secure them with a 8 in.diameter hose clamp and
sealing band.
Slide the 6 in. side of the reducer over the outlet of the fan and
sealing ring, then secure with screws provided. Refer Figure A.5
FIGURE A.5 FOR SINGLE ARM
FAN OUTLET
SF2400
fan
REDUCER 8 in. - 6 in.
8 in. DIAMETER
CONNECTION HOSE
8 in. HOSE CLAMP
8 in. DIAMETER
CONNECTION HOSE
8 in. HOSE CLAMP
8-8 in. COUPLING
SF4200 FAN

STATIFLEX 800 DUAL ARM.

Follow steps 1 thru 5 for each arm of the dual arm system.
Step : 6
Install the Non-return valves (NRV) as shown in figure A.6 below
for the dual arm systems of SF2400 and SF4200. NRV to be
connected between the hose and reducer / 8 in. coupling. Secure
the NRV to hose with hose clamps and use sheet metal screws
provided to attach to reducers / couplings on both sides. Verify
the flow direction of the NVR with Figure A.6.
FIGURE A.6 FOR DUAL ARM
SF2400
8 in. - 6 in. REDUCER
SF4200
8 - 8 in. Coupling
Install the ARMS. Refer to manual provided with the ARMS.
•
• Connect the Statiflex unit and Fans to the power supply and on /
off controls.
ATTENTION
In case the filter unit is mounted left of the fan, the fan
will be in reverse position, resulting in centerpoints of
fan outlet and Statiflex 800 inlet not aligning. This will
not affect system performance.
A-5
INSTALLATION
AIRFLOW
DIRECTION
8 in. DIAMETER
NON-RETURN VALVE
AIRFLOW
DIRECTION
8 in. DIAMETER
NON-RETURN VALVE
FAN