Lincoln Electric Statiflex 800 Operator's Manual page 16

INSTALLATION
STATIFLEX ® 800
Step : 4
Connect the main power cord to the terminal blocks as shown
in Figure A.11.
Refer to the wiring diagram on page F-1 for more details.
FIGURE A.11
Terminal Blocks
Or
Tightening Torque 0.6 N-m / 5.3 lb-in.
Step : 5
Secure the main power cord by tightening the Strain relief.
Step : 6
Reassemble the cover plate using all four screws.
Step : 7
Close the access door, secure with two screws.
A-8