Table of Contents
Advertisement
STATIFLEX
®
800
NON RETURN
FAN REDUCER
8.5 ft
(2.60 m)
Recommended
9.06 in.
(230 mm)
Note - *** This is the recommended maximum distance (both sides) using the flexible hose
(Dia 8") provided with the unit. Minimum distance is based on the space availability
at install, cut the hose to the required length on both sides. Maximum distance can
be increased if hard ducting is used – contact Lincoln Electric for more details.
NON RETURN
FAN
COUPLING
8.5 ft
(2.60 m)
Recommended
Note - *** This is the recommended maximum distance (both sides) using the flexible hose
(Dia 8") provided with the unit. Minimum distance is based on the space availability
at install, cut the hose to the required length on both sides. Maximum distance can
be increased if hard ducting is used – contact Lincoln Electric for more details.
FIGURE A.7 DUAL ARM SETUP - SF2400 EXTRACTION FANS
3" OFFSET
FROM THE
VALUE
CENTER
HOSE
CLAMP
HOSE
70" - 75" MAX***
FIGURE A.8 DUAL ARM SETUP - SF4200 EXTRACTION FANS
3" OFFSET
FROM THE
VALUE
CENTER
HOSE
CLAMP
HOSE
50" - 55" MAX***
Mounting screw vertical
center to center distance
11 in
Mounting screw vertical
center to center distance
11 in
9
ft
(2.75 m)
Recommended
A-6
INSTALLATION
ATTENTION
The SF 2400 which is mounted right of the
Statiflex 800 filter unit will be in reverse
position, resulting in center points of fan
outlet and filter inlet not aligning. This will
not affect system performance.
15.5 in
Mounting screw horizontal
center to center distance
9
ft
(2.75 m)
Recommended
ATTENTION
The SF 4200 which is mounted right of the
Statiflex 800 filter unit will be in reverse
position, resulting in center points of fan
outlet and filter inlet not aligning. This will
not affect system performance.
15.5 in
Mounting screw horizontal
center to center distance
Advertisement
Table of Contents
