Bollhoff RIVNUT B 4090 Manual page 7

Safety recommendations
• Use only original spare parts: failure to comply with this rule will render the warranty null and void.
• Access inside the tool is reserved to qualified personnel. Do not disconnect any cable before
disconnecting the battery. Pay attention to the voltage remaining in capacitors, which may last for
many hours. Pay attention to possible hot parts.
• In case of faults, do not try to repair the tool if you do not possess the necessary knowledge.
In case of malfunction, entrust the device to a repairer authorized by the manufacturer.
• The tool must be operated and used by personnel trained and authorized by the manufacturer.
Repair, maintenance, assistance
• Tool maintenance must be carried out only by qualified personnel. Maintenance or repair carried
out by non qualified personnel may cause injuries.
• Use only original spare parts when performing tool maintenance. The use of non authorized
components or the failure to comply with the maintenance instructions involves the risk of electric
shock or injury.
• Have the electrically-operated tool repaired only by qualified technicians and use only original spare
parts. This ensures the constant safety of the electrically-operated tool.
Additional general safety rules
• The device has been designed to be used with the material recommended and supplied by the
manufacturer.
• The customer must train operators on the use and precautions for use concerning this device.
• The customer is the only person responsible for possible modifications to the device, of maintenance
which does not comply with the instructions contained in this manual or performed using other
materials.
• The device must undergo regular maintenance, following the recommendations made in this
regard by a person who has received appropriate training, in particular with regard to disassembly
and repair.
• When the device is moved, be careful not to place your hand on the trigger to avoid operating the
device unintentionally.
• If the rivet is placed on the rod by hand, your fingers must be on the rivet stem and must not touch
the ends of the rivet to avoid being crushed. It is recommended to place the rivet into the piece to
be processed and to fit the device rod afterwards, thus eliminating any risk of injury to the fingers.
• The use of gloves is recommended.
• Do not operate the device while pointing it at a person and make sure that no objects get caught
in the device mechanism.
• The operator must not use the device if a piece is missing or if it is not tightened properly.
• The device must be used in compliance with the current legislation.
Call Cardinal Components to Order or for a Quote
7
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com