Bollhoff RIVNUT B 4090 Manual page 18

I
4. Start condition
Select the status of the tool at start.
Available options: Screwing done – Without condition.
I
5. Force setting lock
By pushing on both + and - button at the same time, the setting is
getting lock, which means, that it will not be possible to modify the
setting force "SET" accessibility button, from production page.
Operation is reversible by proceeding the same way
I
6. Service
Service sub-menu, see below.
I
EXIT
For coming back to the production main page.
Service sub-menu
Access by selecting option 6 of the main menu. Selectable options are:
I
Option 1: Identification
Displays Serial number, Firmware version, Total number of cycles.
These data are important in case you require assistance.
All our battery tool have been tested before delivery. Counter level
might be includes between 1500 cycles and 5000 cycles.
I
Option 2: Buttons
Allows checking the functionality of the three display buttons and
the trigger. Differently from the other screens, to exit all three display
buttons shall be pushed at the same time.
Call Cardinal Components to Order or for a Quote
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com
18