Warning List - Bollhoff RIVNUT B 4090 Manual

7 - Warning list

In case of abnormal conditions during operation, the "warning" page will indicate the alarm
and possibly the operation to eliminate it.
No. Text on the display
1 Read Operator Manual
2 Read Operator Manual
3 Wrong battery
4 Not ready, press RESET
5 Low Battery Voltage
6 Read Operator Manual
7 Read Operator Manual
8 Bad M1 Position, press RESET
9 Pressure, please Check Oil
10 Force not correct
11 M1 Motor, High Temperature
12 M2 Motor, High Temperature
13 Drive, High Temperature
No Rivet Nut
14 ® on the mandrel
15 Error communication
16 Error communication
17 Wrong battery
18 Nose not installed
19 M1 home reset
21 Maintenance service needed
22
Call Cardinal Components to Order or for a Quote
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com
Meaning
High current of the M1 motor
High current of the M2 motor
The battery is not correct
M1 motor in the wrong position
Discharged battery
Excessive pull time
Excessive M2 screwing/unscrewing
time
High pull end position
Low oil pressure
-
Excessive M1 motor temperature
Excessive M2 motor temperature
Excessive temperature of the
electronics
When enabled in menu "Start
condition" this alarm warns that
a rivet is not loaded
Internal hardware communication
error between LCD CPU and M1
Drive board or M2 Drive board
Internal hardware communication
error between LCD CPU and M1
Drive board or M2 Drive board
The battery connected is not correct Replace the battery by a correct one
When enabled means that the nose
is uninstalled
Error doing M1 home reset
The number of cycles for inspection
is reached
At powerup at least one LCD
pushbutton is pressed
Solution
Reduce the force
Contact the Assistance Service
Replace the battery and use only
the batteries provided
Press RESET
Replace the battery
Check the oil level or replace the
battery
Contact the Assistance Service
Check the oil level and press Reset
Check the oil level
-
Wait a few minutes before
resuming work
Wait a few minutes before
resuming work
Wait a few minutes before
resuming work
Load a Rivet Nut
® on the mandrel
Contact the Assistance Service
Contact the Assistance Service
Check that the nose is correctly
installed against the body
Push on "Reset button" for driving
the system in rest position
Contact the Assistance Service or
realise the maintenance operations
Check that the different button are
free / body
26