Preparations For Use; Connection To The Battery - Bollhoff RIVNUT B 4090 Manual

2 - Preparation for use
Charging the battery
• Store the battery charger in a cool and ventilated area.
• Plug the battery charger in the power outlet. SAFETY WARNING: make sure the power supply
source is compatible with the requirements indicated on the product plate.
• Insert the battery it in the battery charger keeping it parallel. Do not force the battery since it should slide
easily in place. Any possible difficulty may indicate an incorrect alignment.

Connection to the battery

The device is delivered with a 14.4 V / 2.6 Ah battery power supply.
To connect the battery to the tool:
• Grab the tool
• With your other hand, grab the battery so that the quick-release lever is facing downwards
• Insert the battery into place by sliding it upwards until the quick-release lever on the battery clicks.
It is required to use only the original battery to ensure proper operation of the device.
Assembling the device
SAFETY: BEFORE CARRYING OUT ANY INTERVENTION ON THE DEVICE, DISCONNECT
THE BATTERY
You have two assembly options:
• Fitting with special Rivet Nut
tool life)
• Fitting with standard capscrewsK
Fitting with special Rivet Nut
Fork and nose for studs &
force >18 kN (M8 & M10)
Call Cardinal Components to Order or for a Quote
11
800-236-3200 - sales@rivetnutusa.com - www.rivetnutusa.com
® mandrels (recommended by BÖLLHOFF for extended
® mandrels
3
M3 M4
236 113 XX 020
03 04 05 06 08
376 113 XX 020
– 04 05 06 08
236 113 XX 030
03 04 05 06 08
376 113 XX 030
– 04 05 06 08
B4090-4076-0303
B4090-4076-0304
18 kN 18
M8
M5 M6 M8
236 913 08 110
08
22 kN
M10
236 913 10 019
–
10
–
X